SCRAPPING MANQUENS

AUTOMATIC VERTICAL - HORIZONTAL SCRAPING MACHINE (CONVERTIBLE)

Produced by ARTMAC It gives you a chance to use this machine in two forms as vertical and horizontal when needed. It also takes just two minutes to change from vertical to horizontal. There is a plc and air filling system which is controlled by two buttons on the robot. There are two more buttons for left and right turning also.This system is automatic and can be used for scraping or brushing.

The advantages of this robot;
*Automatic air filling to avoid bursting rubber.
*Automatic air discharging end of scraping.
the legs of robot are automatically turned left and right by the plc. the support piston is automatically up and down. *Possibility to set size between two legs
Two legs have different air filling system, there is a possibility to fill air to different *It is easy to change rubber when it is needed. The Model Number: VHSM-2011
System Requirements: 380V 50Hz / 6 bar air Pressure inside the Rubber Tube: 150 - 200 mbar

AUTO SCRAPING MACHINE

This system which is run automatically has been produced by ARTMAC There is a PLC and air filling system which is controlled by two buttons on the robot.

This system is automatic and can be used for scraping or brushing. The advantages of this robot;
*Automatic air filling to avoid bursting of the rubber tubes.
*Automatic air discharging end of scraping.
*The legs of robot are automatically turned left and right by the PLC.
*The support piston is automatically up and down.
*Possibility to set size between two legs
*Two legs have different air filling system, there is a possibility to fill air to different pressures
*It is easy to change rubber when it is needed.
*System Requirements: 220 V 50Hz / 6 bar air
*Pressure inside the Rubber Tube : 150 - 200 mbar
*Air & Electricity Consumption: Around 40 lt. air per pant - 20watt/h

SEMI-AUTO SCRAPING MACHINE

This system which is run automatically has been produced by ARTMAC
There is a PLC and air filling system which is controlled by two buttons on the robot.

This system is automatic and can be used for scraping or brushing. The advantages of this robot;
*Automatic air filling to avoid bursting of the rubber tubes.
*Automatic air discharging end of scraping.
*The legs of robot are manually turned left and right by one buttons.
*The support piston is automatically up and down.
*Possibility to set size between two legs
*Two legs have different air filling system, there is a possibility to fill air to different pressures
*It is easy to change rubber when it is needed.
*System Requirements: 220 V 50Hz / 6 bar air
*Pressure inside the Rubber Tube : 150 - 200 mbar
*Air & Electricity Consumption:Around 40 lt. air per pant - 20watt/h